If You Want to Know and Purchases Fine Group’s Analogue Tensile Testing Machines. Then, You Can Contact us Shortly and Check Features. We added here detailed specifications for the Analogue Tensile Testing Machines.
- Variety of tests like Tension, Compression, Cross breaking / Bending, Shear, Linear Bonding / Gripping / Peeling strength of adhesives & tapes, etc. are conducted.
- Suitable for testing a wide range of materials like rubber, wood, plywood, plastic, rexins, ceramics, teflon, cardboard, latex, composites, ferrous metals, non-ferrous metals,etc. of various forms like round, flat, thread, wires, dumbells, fabric, belts, strips, ropes, etc.
- Wide range of Grips, Attachments & Special fixtures are available to suit variety of material and shapes.
- Continuous roll autographic “Load Vs Elongation” recorder.
- Elongation scale with least count 1 mm.
- Three measuring ranges for accurate testing.
- A number of straining speeds are available for proper selection.
- Machine with AC or DC drive motor is available.
- Various Models – Maximum Capacity from 200 N to 50 kN.
- Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610.
- Hand operated cutting press with different sizes dies are available for cutting dumbbell specimen.
Technical Specification for Analogue Tensile Testing Machines
| MAX. CAPACITY | MODEL – TKG | MODEL – TKG | MODEL – TKG | ||||||
| 200 N | 500 N | 1000 N | 2500 N | 5000 N | 10 kN | 25 kN | 50 kN | ||
| Measuring Ranges | 1st | 0-50 N | 0-100 N | 0-200 N | 0-500 N | 0-1000 N | 0-2 kN | 0-5 kN | 0-10 kN |
| 2nd | 0-100 N | 0-250 N | 0-500 N | 0- 1000 N | 0-2500 N | 0-5 kN | 0-10 kN | 0-25 kN | |
| 3rd | 0-200 N | 0-500 N | 0-1000 N | 0-2500 N | 0-5000 N | 0-10 kN | 0-25 kN | 0-50 kN | |
| Ranges Least Counts | 1st | 0.1 N | 0.2 N | 0.4 N | 1 N | 2 N | 0.004 kN | 0.01 kN | 0.02 kN |
| 2nd | 0.2 N | 0.05 | 1 N | 2 N | 5 N | 0.01 kN | 0.02 kN | 0.05 kN | |
| 3rd | 0.4 N | 1 N | 2 N | 5 N | 10 N | 0.02 kN | 0.05 kN | 0.1 kN | |
| Elongation Scale L.C | 1 mm | 1 mm | 1 mm | ||||||
| Grip Speration Minimum – Maximum | 25 mm 1000 mm |
25 mm 750 mm |
25 mm 600 mm |
||||||
| Traverse Speeds, Standard Speeds | 10 Speeds – 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm / min. | 100 mm / min. | 25 mm / min | ||||||
| Optional Speeds | – | Additional speed of 50 mm/min | Alternative speed of 1.3 mm/min in place of 25 mm/min OR 10 Speeds – 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm / min. |
||||||
| Additional speed of 500 mm/min | |||||||||
| Alternative speed of 1.3 mm/min in place of 100 mm/min | |||||||||
| 10 Speeds – 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm/min. | |||||||||
| Optional Variable speed drive stepless variation | 50 to 500 mm / min. | 10 to 100 mm / min. | 2.5 to 25 mm / min. | ||||||
| H.P (for standard speed) | 0.25 / 0.5 | 0.5 | 0.5 | ||||||
| Supply | 3-Phase, 415 Volts, 50Hz, AC | ||||||||
| Over travel safety | Provided with each model | ||||||||
| Recorder (Graph) | Provided with each model | ||||||||
NOTE
It is very important that while ordering the machine due care is taken in selecting proper capacity, traverse speeds, grip separation & grips. Following details should be furnished to ensure that testing of the materials is in conformity with the standards followed :
- Size, shape, materials of test specimens.
- Minimum & Maximum breaking load for test specimen (Not strength).
- The standard IS / BS / ASTM etc. to be followed.
- Straining rate required.
- Please send representative samples.
Dumb-Bell Specimen Cutting Accessories :
- Hand Operated Cutting Press, Size 150mm x 150mm
- Die overall length 50 mm as per IS:34 Part I & II, IS:5831
- Die overall length 75 mm as per IS:3400 Part, IS:434 Part I & II, IS:5831
- Die overall length 115 mm as per IS:3400 Part I, IS:2414, IS:2415 & IS:443
- Die overall length 152 mm as per IS:2076
Grips for Tensile Testing Machines ( All Versions ) :
| MODEL | CAPACITY | DESCRIPTION | SPECIFICATION | APPLICATION |
| TG 1/1 | 500 N | Eccentric Roller grip | 25 mm wide x 3 mm thick | For Dumbell shaped specimen of rubber and plastics suits TKG- 200 N & TKG -500 N |
| TG 1/2 | 2 kN | Eccentric Roller grip | 25 mm wide x 5 mm thick | For Dumbell shaped specimen of rubber and plastics suits TKG -1000 N & TKG-2500 N |
| TG 1/3 | 2 kN | Eccentric Roller grip | 35 mm wide x 6 mm thick | For Dumbell shaped specimen of rubber and plastics suits TKG- 1000 N & TKG -2500 N |
| TG 1/4 | 5 kN | Eccentric Roller grip | 50 mm wide x 6 mm thick | For Dumbell shaped specimen of rubber and plastics suits TKG -1000 N & TKG-2500 N |
| TG 1/5 | 5 kN | Eccentric Roller grip | 50 mm wide x 6 mm thick | For Dumbell shaped specimen of rubber and plastics suits TKG 5000 N & TKG 10 kN |
| TG 2/1 | 2.5 kN | Cam type grip | 100 mm wide x 10 mm thick | For fabric strip suits TKG -2500 N |
| TG 2/2 | 2.5 kN | Cam type grip | 100 mm wide x 10 mm thick | For fabric strip suits TKG -5000 N & TKG-10 kN |
| G 3/1 | 200 N | Vice type grip | 25 mm wide x 4 mm thick | For thin flat samples of smaller strength like paper etc suits TKG -200 N |
| TG 3/2 | 5 kN | Vice type grip | 500 mm wide x 25 mm thick | For flat materials like asbestos, leather, fabric, plywood suits TKG -2500 N |
| TG 3/3 | 5 kN | Vice type grip | 50 mm wide x 25 mm thick | For flat materials like asbestos, leather, fabric, plywood suits TKG -5000 N & TKG-10 kN |
| TG 3/4 | 2.5 kN | Vice type grip | 20 mm wide x 5 mm thick | For rigid wires upto 1 mm and flat strips suits TKG -2500 N |
| TG 3/5 | 5 kN | Vice type grip | 100 mm wide x 6 mm thick | For fabric specimen suits TKG-2500 N |
| TG 3/6 | 5 kN | Vice type grip | 100 mm wide x 6 mm thick | For fabric specimen suits TKG -5000 N & TKG-10 kN |
| TG 3/7 | 5 kN | Vice type grip | 200 mm wide x 10 mm thick | For fabric specimen suits TKG -5000 N & TKG -10 kN |
| TG 5/1 | 2.5 kN | Wedge type grip | 25 mm wide x 5 mm thick | For flat strips and wires suits TKG -2500 N |
| TG 5/2 | 10 kN | Wedge type grip | Round 5 to 10 mm Flat 25 mm wide x 10 mm thick | For round specimen or flat specimen suits TKG -5000 N & TKG -10 kN |
| TG 5/3 | 50 kN | Wedge type grip | Round 5 to 10 mm Flat 35 mm wide x 12 mm thick | For round specimen or flat specimen suits TKG -50 kN |
| TG 5/4 | 2.5 kN | Wedge type grip | Flat 25 mm wide x 20 mm thick | For extra thick plywood specimen suits TKG -2500 N |
| TG 5/5 | 50 kN | Wedge type grip | Flat 200 mm wide x 5 mm thick | For geo textile as per ASTM suits TKG -50 kN |
| TG 5/6 | 50 kN | Wedge type grip | Flat 38 mm wide x 20 mm thick | For extra thick specimen like plywood suits TKG -25 & 50 kN |
| TG 6/1 | 2.5 kN | O ring test fixture | – | For testing O rings suits TKG -2500 N |
| TG 7/1 | 500 kN | Bollard type grip | 20 SWG or finer | For fine flexible wires suits TKG -200 N & TKG -500 N |
| TG 7/2 | 1000 kN | Bollard type grip | Tape width 6 mm max. | For HDPE tape suits TKG -1000 N |
| TG 7/3 | 2.5 kN | Bollard type grip | 20 SWG or finer | For fine flexible wires suits TKG -2500 N |
| TG 7/4 | 2.5 kN | Bollard type grip | 20 SWG or finer | For fine flexible wires suits TKG -10 kN |
| TG 7/5 | 2.5 kN | Bollard type grip | 20 SWG or finer | For fine flexible wires suits TKG -25 kN & TKG -50 kN |
| TG 7/6 | 5 kN | Bollard type grip | Dia 4mm ropes. | For non metallic ropes / cords of nylon etc suits TKG -5000 N |
| TG 8/1 | 10 kN | Vice cum wedge type grip | Upto 5mm dia, Flat 25mm wide x 5mm thick | For wires and flat strips suits TKG -10 kN |
| TG 8/2 | 50 kN | Vice cum wedge type grip | Round 5 to 10mm, Flat 35mm widex10mm thk | For wires. Rods, and strips suits TKG -25 kN & TKG -50 kN |
| TG 8/3 | 50 kN | Vice cum wedge type grip | Flat 35 mm wide, x 5 mm thick. | For harder wires and strips suits TKG -25 kN & TKG – 50 kN |
| TG 8/4 | 50 kN | Vice cum wedge type grip | Flat 60 mm wide, x 10 mm thick. | For wider flat strips suits TKG -25 kN & TKG -50 kN |
| TG 9/1 | 10 kN | Special Bollard grip | Dia 10 to 16 mm | For Nylon ropes suits TKG -10 kN |
| TG 9/2 | 25 kN | Special Bollard grip | Dia 10 to 16 mm | For Nylon ropes suits TKG -25 kN & TKG -50 kN |
| TG 9/3 | 50 kN | Special Bollard grip | 50 mm wide | For flat belts and strips suits TKG -25 kN & TKG -50 kN |
| TG 9/4 | 50 kN | Special Bollard grip | 100 mm wide | For flat belts and strips suits TKG -25 kN & TKG -50 kN |
| TG 10/1 | 10 kN | Grip for special | shaped specimen, As per IS 867 | For moulded plastic specimen as per IS 867 suits TKG -2500 N |
| TG 10/2 | 10 kN | Grip for special | shaped specimen, As per IS 867 | For moulded plastic specimen as per IS 867 suits TKG -10 kN |
| TG 10/3 | 10 kN | Grip for special | shaped specimen, As per IS 867 | For moulded plastic specimen as per IS 867 suits TKG -25 kN & TKG -50 kN |
| TG 11/1 | 200 N | Compression cage | 85 (L) x 60 (D) x 140 (H) mm with dial gauge and scale | For compression test on flexible / soft materials suits TKG- 200 N |
| TG 11/2 | 200 N | Compression cage | 85 (L) x 60 (D) x 140 (H) mm without dial gauge and scale | For compression test on flexible / soft materials suits TKG -200 N |
| TG 11/3 | 2.5 kN | Compression cage | 100 (L) x 65 (D) x 200 (H) mm | For compression test on flexible/soft materials suits TKG -2500 N |
| TG 11/4 | 10 kN | Compression cage | 150 (L) x 80 (D) x 200 (H) mm | For compression test on flexible / soft materials suits TKG-25 & 50kN |
| TG 11/5 | 50 kN | Compression cage | 150 (L) x 150 (D) x 200 (H) mm | For compression test on flexible / soft materials suits TKG -25 & 50kN |
| TG 11/6 | 10 kN | Compression cage with dial gauge scale and ball edge. | 80 (L) x 60 (D) x 60 (H) mm | For compression test on flexible / soft materials suits TKG -25 & 50kN |
| TG 11/7 | 50 kN | Compression cage with fixtures | As per IS 10570 / 83 | For cold crushing strength suits TKG- 25 kN & 50kN |
| TG 11/8 | 10 kN | Compression cage with dial gauge & ball cage | 50 x 50 x 50 mm specimen | For compression test on plywood etc suits TKG -10 kN |
| TG 12/1 | 2.5 kN | Bend / cross breaking test fixture | 50 wide x 25 thk x 150 mm span 5 mm roller radius. | For conducting cross breaking test or bend test suits TKG -2500 N |
| TG 12/2 | 10 kN | Bend / cross breaking test fixture | 25 wide x 35 thk x 150 to 300 mm span. | For conducting cross breaking test or bend test suits TKG -10 kN |
| TG 12/3 | 25 kN | Bend / cross breaking test fixture | 25 wide x 35 thk x 150 to 400 mm long span. | For conducting cross breaking test or bend test suits TKG -25 kN & 50 kN |
| TG 12/4 | 25 kN | Bend / cross breaking test fixture | 60 wide x 10 thk x 90 mm span roller dia 30 mm | For a specimen 60 wide x 10 thk x 120 mm long suits TKG -25 kN & TKG 50 kN |
| TG 12/5 | 25 kN | MOR test fixture with compression cage | 40 x 40 mm specimen x 100 span | For conducting on refractory castables as per IS 10570 / 83 suits TKG 25- kN & 50 kN |
| TG 12/6 | 1 kN | Cross breaking test fixture | 50 wide x 100 mm span Roller radius 3.2 mm | For testing brake shoe material as per IS 2742 part 3 suits TKG- 2500 N |
| TG 12/7 | 2500 N | MOR test fixture | 500 mm span x width 100 mm | For plywood. |
| TG 12/8 | 10 kN | MOR test Fixture with dial gauge | 600 mm span x 80 mm width support radius 12, 18, 27, 37.5 mm | For plywood. |
| TG 12/9 | 5 kN | Bend test Fixture | 600 mm span x width 50 mm | For two point loading as per IS 1734 part II suits TKG-25 & 50 kN |
| TG12/10 | 10 kN | Cross breaking test fixture | Span 500 mm x width 100 mm Roller dia 15 | For MOR test as per IS 1658 / 77. |
| TG 13/1 | – | Hand operated Press | 150 mm wide | For cutting Dumbell shaped rubber specimen with respective dies suits TKG -2500 N |
| TG 14/1 | 25 kN | Shear strength attachment | 20 mm width x 10 mm thk | For testing internal shear strength as per IS 2742-92 Part 5 suits TKG -25 & 50 kN |
| TG 14/2 | 10 kN | Glue shear test attachment. | 30 mm wide x 25 mm thk. | For glue shear testing of plywood suits TKG -10 kN |
| TG 14/3 | 10 kN | Shear test fixture | Dia 12.7 mm | For shear testing of laminates as per IS 1998 suits TKG -25 & 50 kN |
| TG 15/1 | 10 kN | Grip for plywood screw & nail withdrawl test | 75 mm wide specimen | For testing plywoods as per IS 2380 part XIV suits TKG -10 kN |
| TG 15/2 | 10 kN | Grip for plywood tensile strength perpendicular to surface | 50 x 50 mm specimen | For plywood as per IS 2380 Part V suits TKG -10 kN |
| TG 15/3 | 25 kN | Grip for plywood screw & nail with drawl test | 75 mm wide specimen | For testing plywood as per IS 2380 Part XIV suits TKG-25 & 50 kN |
| TG 15/4 | 25 kN | Grip for plywood tensile strength perpendicular to surface | 50 x 50 mm specimen. | For plywood as per IS 2380 Part V suits TKG – 25 & 50 kN |
| TG 21 | 10 kN | Special grip for fanhook | – | For testing fan hook suits TKG -25 & 50 kN |
| TG 22/1 | 1 kN | Grip for security of attachment of bottom stops of Zip | – | For testing of Zip as per Annexure D of IS: 3148-1991 Fig.7 suits TKG -2500 N |
| TG 22/2 | 1 kN | Grip for security of attachment for top steps & puller | – | For testing Zip as per Annexure H of IS: 3148-1991 (Fig 11 and Fig. 8) |
Related posts:Mechanical Extensometers (Model : FXT-3)Coil Spring Testing Machines, Digital, Hand Operated (Model : STM)Bend and Rebend Testing Machines (Model - FBR-100 kN)Micro Vickers Hardness Testers (Model : FMV-1)ASTM Pendulum Impact Testing Machines (Model : AIT-300-ASTM, AIT-300-ASTM-D)Horizontal Type DSP Based Dynamic Balancing Machines (Model : FBM)Vickers Cum Brinell Hardness Testing (Model : BV)
Mechanical Extensometers (Model : FXT-3)
Coil Spring Testing Machines, Digital, Hand Operated (Model : STM)
Bend and Rebend Testing Machines (Model - FBR-100 kN)
Micro Vickers Hardness Testers (Model : FMV-1)
ASTM Pendulum Impact Testing Machines (Model : AIT-300-ASTM, AIT-300-ASTM-D)
Horizontal Type DSP Based Dynamic Balancing Machines (Model : FBM)
Vickers Cum Brinell Hardness Testing (Model : BV)