Electronic Computerised Tensile Testing Machines (Model : TKG

If You Want to Know and Purchases Fine Group’s Analogue Tensile Testing Machines. Then, You Can Contact us Shortly and Check Features. We added here detailed specifications for the Analogue Tensile Testing Machines.

Latest Windows based, Users friendly, Accurate, Menu driven software.
Fully automatic, on screen calculations based on the delivered data.
Automatic Data capture, storage & graphic display.
Recording, storage & retrieval of results & details.
Build in facility for printing of test results and the graph.
Load measurement by load cell.
Over Load & Over travel safety.
On line display of Load, Elongation & Graph.
Tare load & reset elongation facilities available.
Selectable units like N, kN, kgf, lbf, inch, mm, etc.
Fully automatic on screen calculations like UTS, YS, Proof stress, etc.
Electronic Extensometer (Optional) is available for proof stress evaluation.
It is possible to use a number of load cells, say two or three, to cover much wider range of load, to suit the application. Cost of one load cell is included in the price, but additional load cell will be at extra cost.
Standard load resolution is with 10,000 counts. Finer resolution (Optional) with 20,000 counts can also be offered at extra cost. Standard displacement resolution is 0.1 mm.
Types of tests, testing materials, grips, attachments, fixtures, straining speed as like Analogue version, Model : TKG.
Various Models – Maximum Capacity from 200 N to 50 kN.
Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610.

Technical Specification for Electronic / Computerised Tensile Testing Machines

MAX. CAPACITY	MODEL – TKG-E / TKG-EC				MODEL – TKG-E / TKG-EC		MODEL – TKG-E / TKG-EC
	200 N	500 N	1000 N	2500 N	5000 N	10 kN	25 kN	50 kN
Measuring Ranges	0-200 N	0-500 N	0-1000 N	0-2500 N	0-5000 N	0-10 kN	0-25 kN	0-50 kN
Ranges Least Counts	0.02 N	0.05 N	0.1 N	0.25 N	0.5 N	1 N	2.5 N	5 N
Elongation Scale L.C	1 mm				1 mm		1 mm
Grip Speration Minimum – Maximum	25 mm 1000 mm				25 mm 750 mm		25 mm 600 mm
Traverse Speeds, Standard Speeds	10 Speeds – 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm / min.				100 mm / min.		25 mm / min
Optional Speeds	–				Additional speed of 50 mm/min		Alternative speed of 1.3 mm/min in place of 25 mm/min OR 10 Speeds – 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm / min.
					Additional speed of 500 mm/min
					Alternative speed of 1.3 mm/min in place of 100 mm/min
					10 Speeds – 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm/min.
Optional Variable speed drive stepless variation	50 to 500 mm / min.				10 to 100 mm / min.		2.5 to 25 mm / min.
H.P (for standard speed)	0.25 / 0.5				0.5		0.5
Supply	3-Phase, 415 Volts, 50Hz, AC
Over travel safety	Provided with each model

NOTE

It is very important that while ordering the machine due care is taken in selecting proper capacity, traverse speeds, grip separation & grips. Following details should be furnished to ensure that testing of the materials is in conformity with the standards followed :

Size, shape, materials of test specimens.
Minimum & Maximum breaking load for test specimen (Not strength).
The standard IS / BS / ASTM etc. to be followed.
Straining rate required.
Please send representative samples.

Dumb-Bell Specimen Cutting Accessories :

Hand Operated Cutting Press, Size 150mm x 150mm
Die overall length 50 mm as per IS:34 Part I & II, IS:5831
Die overall length 75 mm as per IS:3400 Part, IS:434 Part I & II, IS:5831
Die overall length 115 mm as per IS:3400 Part I, IS:2414, IS:2415 & IS:443
Die overall length 152 mm as per IS:2076

Grips for Tensile Testing Machines ( All Versions ) :

MODEL	CAPACITY	DESCRIPTION	SPECIFICATION	APPLICATION
TG 1/1	500 N	Eccentric Roller grip	25 mm wide x 3 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG- 200 N & TKG -500 N
TG 1/2	2 kN	Eccentric Roller grip	25 mm wide x 5 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG -1000 N & TKG-2500 N
TG 1/3	2 kN	Eccentric Roller grip	35 mm wide x 6 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG- 1000 N & TKG -2500 N
TG 1/4	5 kN	Eccentric Roller grip	50 mm wide x 6 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG -1000 N & TKG-2500 N
TG 1/5	5 kN	Eccentric Roller grip	50 mm wide x 6 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG 5000 N & TKG 10 kN

TG 2/1	2.5 kN	Cam type grip	100 mm wide x 10 mm thick	For fabric strip suits TKG -2500 N
TG 2/2	2.5 kN	Cam type grip	100 mm wide x 10 mm thick	For fabric strip suits TKG -5000 N & TKG-10 kN

G 3/1	200 N	Vice type grip	25 mm wide x 4 mm thick	For thin flat samples of smaller strength like paper etc suits TKG -200 N
TG 3/2	5 kN	Vice type grip	500 mm wide x 25 mm thick	For flat materials like asbestos, leather, fabric, plywood suits TKG -2500 N
TG 3/3	5 kN	Vice type grip	50 mm wide x 25 mm thick	For flat materials like asbestos, leather, fabric, plywood suits TKG -5000 N & TKG-10 kN
TG 3/4	2.5 kN	Vice type grip	20 mm wide x 5 mm thick	For rigid wires upto 1 mm and flat strips suits TKG -2500 N
TG 3/5	5 kN	Vice type grip	100 mm wide x 6 mm thick	For fabric specimen suits TKG-2500 N
TG 3/6	5 kN	Vice type grip	100 mm wide x 6 mm thick	For fabric specimen suits TKG -5000 N & TKG-10 kN
TG 3/7	5 kN	Vice type grip	200 mm wide x 10 mm thick	For fabric specimen suits TKG -5000 N & TKG -10 kN

TG 5/1	2.5 kN	Wedge type grip	25 mm wide x 5 mm thick	For flat strips and wires suits TKG -2500 N
TG 5/2	10 kN	Wedge type grip	Round 5 to 10 mm Flat 25 mm wide x 10 mm thick	For round specimen or flat specimen suits TKG -5000 N & TKG -10 kN
TG 5/3	50 kN	Wedge type grip	Round 5 to 10 mm Flat 35 mm wide x 12 mm thick	For round specimen or flat specimen suits TKG -50 kN
TG 5/4	2.5 kN	Wedge type grip	Flat 25 mm wide x 20 mm thick	For extra thick plywood specimen suits TKG -2500 N
TG 5/5	50 kN	Wedge type grip	Flat 200 mm wide x 5 mm thick	For geo textile as per ASTM suits TKG -50 kN
TG 5/6	50 kN	Wedge type grip	Flat 38 mm wide x 20 mm thick	For extra thick specimen like plywood suits TKG -25 & 50 kN

TG 6/1	2.5 kN	O ring test fixture	–	For testing O rings suits TKG -2500 N

TG 7/1	500 kN	Bollard type grip	20 SWG or finer	For fine flexible wires suits TKG -200 N & TKG -500 N
TG 7/2	1000 kN	Bollard type grip	Tape width 6 mm max.	For HDPE tape suits TKG -1000 N
TG 7/3	2.5 kN	Bollard type grip	20 SWG or finer	For fine flexible wires suits TKG -2500 N
TG 7/4	2.5 kN	Bollard type grip	20 SWG or finer	For fine flexible wires suits TKG -10 kN
TG 7/5	2.5 kN	Bollard type grip	20 SWG or finer	For fine flexible wires suits TKG -25 kN & TKG -50 kN
TG 7/6	5 kN	Bollard type grip	Dia 4mm ropes.	For non metallic ropes / cords of nylon etc suits TKG -5000 N

TG 8/1	10 kN	Vice cum wedge type grip	Upto 5mm dia, Flat 25mm wide x 5mm thick	For wires and flat strips suits TKG -10 kN
TG 8/2	50 kN	Vice cum wedge type grip	Round 5 to 10mm, Flat 35mm widex10mm thk	For wires. Rods, and strips suits TKG -25 kN & TKG -50 kN
TG 8/3	50 kN	Vice cum wedge type grip	Flat 35 mm wide, x 5 mm thick.	For harder wires and strips suits TKG -25 kN & TKG – 50 kN
TG 8/4	50 kN	Vice cum wedge type grip	Flat 60 mm wide, x 10 mm thick.	For wider flat strips suits TKG -25 kN & TKG -50 kN

TG 9/1	10 kN	Special Bollard grip	Dia 10 to 16 mm	For Nylon ropes suits TKG -10 kN
TG 9/2	25 kN	Special Bollard grip	Dia 10 to 16 mm	For Nylon ropes suits TKG -25 kN & TKG -50 kN
TG 9/3	50 kN	Special Bollard grip	50 mm wide	For flat belts and strips suits TKG -25 kN & TKG -50 kN
TG 9/4	50 kN	Special Bollard grip	100 mm wide	For flat belts and strips suits TKG -25 kN & TKG -50 kN

TG 10/1	10 kN	Grip for special	shaped specimen, As per IS 867	For moulded plastic specimen as per IS 867 suits TKG -2500 N
TG 10/2	10 kN	Grip for special	shaped specimen, As per IS 867	For moulded plastic specimen as per IS 867 suits TKG -10 kN
TG 10/3	10 kN	Grip for special	shaped specimen, As per IS 867	For moulded plastic specimen as per IS 867 suits TKG -25 kN & TKG -50 kN

TG 11/1	200 N	Compression cage	85 (L) x 60 (D) x 140 (H) mm with dial gauge and scale	For compression test on flexible / soft materials suits TKG- 200 N
TG 11/2	200 N	Compression cage	85 (L) x 60 (D) x 140 (H) mm without dial gauge and scale	For compression test on flexible / soft materials suits TKG -200 N
TG 11/3	2.5 kN	Compression cage	100 (L) x 65 (D) x 200 (H) mm	For compression test on flexible/soft materials suits TKG -2500 N
TG 11/4	10 kN	Compression cage	150 (L) x 80 (D) x 200 (H) mm	For compression test on flexible / soft materials suits TKG-25 & 50kN
TG 11/5	50 kN	Compression cage	150 (L) x 150 (D) x 200 (H) mm	For compression test on flexible / soft materials suits TKG -25 & 50kN
TG 11/6	10 kN	Compression cage with dial gauge scale and ball edge.	80 (L) x 60 (D) x 60 (H) mm	For compression test on flexible / soft materials suits TKG -25 & 50kN
TG 11/7	50 kN	Compression cage with fixtures	As per IS 10570 / 83	For cold crushing strength suits TKG- 25 kN & 50kN
TG 11/8	10 kN	Compression cage with dial gauge & ball cage	50 x 50 x 50 mm specimen	For compression test on plywood etc suits TKG -10 kN

TG 12/1	2.5 kN	Bend / cross breaking test fixture	50 wide x 25 thk x 150 mm span 5 mm roller radius.	For conducting cross breaking test or bend test suits TKG -2500 N
TG 12/2	10 kN	Bend / cross breaking test fixture	25 wide x 35 thk x 150 to 300 mm span.	For conducting cross breaking test or bend test suits TKG -10 kN
TG 12/3	25 kN	Bend / cross breaking test fixture	25 wide x 35 thk x 150 to 400 mm long span.	For conducting cross breaking test or bend test suits TKG -25 kN & 50 kN
TG 12/4	25 kN	Bend / cross breaking test fixture	60 wide x 10 thk x 90 mm span roller dia 30 mm	For a specimen 60 wide x 10 thk x 120 mm long suits TKG -25 kN & TKG 50 kN
TG 12/5	25 kN	MOR test fixture with compression cage	40 x 40 mm specimen x 100 span	For conducting on refractory castables as per IS 10570 / 83 suits TKG 25- kN & 50 kN
TG 12/6	1 kN	Cross breaking test fixture	50 wide x 100 mm span Roller radius 3.2 mm	For testing brake shoe material as per IS 2742 part 3 suits TKG- 2500 N
TG 12/7	2500 N	MOR test fixture	500 mm span x width 100 mm	For plywood.
TG 12/8	10 kN	MOR test Fixture with dial gauge	600 mm span x 80 mm width support radius 12, 18, 27, 37.5 mm	For plywood.
TG 12/9	5 kN	Bend test Fixture	600 mm span x width 50 mm	For two point loading as per IS 1734 part II suits TKG-25 & 50 kN
TG12/10	10 kN	Cross breaking test fixture	Span 500 mm x width 100 mm Roller dia 15	For MOR test as per IS 1658 / 77.

TG 13/1	–	Hand operated Press	150 mm wide	For cutting Dumbell shaped rubber specimen with respective dies suits TKG -2500 N

TG 14/1	25 kN	Shear strength attachment	20 mm width x 10 mm thk	For testing internal shear strength as per IS 2742-92 Part 5 suits TKG -25 & 50 kN
TG 14/2	10 kN	Glue shear test attachment.	30 mm wide x 25 mm thk.	For glue shear testing of plywood suits TKG -10 kN
TG 14/3	10 kN	Shear test fixture	Dia 12.7 mm	For shear testing of laminates as per IS 1998 suits TKG -25 & 50 kN

TG 15/1	10 kN	Grip for plywood screw & nail withdrawl test	75 mm wide specimen	For testing plywoods as per IS 2380 part XIV suits TKG -10 kN
TG 15/2	10 kN	Grip for plywood tensile strength perpendicular to surface	50 x 50 mm specimen	For plywood as per IS 2380 Part V suits TKG -10 kN
TG 15/3	25 kN	Grip for plywood screw & nail with drawl test	75 mm wide specimen	For testing plywood as per IS 2380 Part XIV suits TKG-25 & 50 kN
TG 15/4	25 kN	Grip for plywood tensile strength perpendicular to surface	50 x 50 mm specimen.	For plywood as per IS 2380 Part V suits TKG – 25 & 50 kN

TG 21	10 kN	Special grip for fanhook	–	For testing fan hook suits TKG -25 & 50 kN
TG 22/1	1 kN	Grip for security of attachment of bottom stops of Zip	–	For testing of Zip as per Annexure D of IS: 3148-1991 Fig.7 suits TKG -2500 N
TG 22/2	1 kN	Grip for security of attachment for top steps & puller	–	For testing Zip as per Annexure H of IS: 3148-1991 (Fig 11 and Fig. 8)