If You Want to Know and Purchases Fine Group’s Vickers Cum Brinell Hardness Testing. Then, You Can Contact us Shortly and Check Features. We added here detailed specifications for the Vickers Cum Brinell Hardness Testing (Model : BV).
- Suitable for finding out Vickers / Brinell hardness of metals from soft to very hard.
- Push button control for load selection.
- A range of test loads for Vickers / Brinell – from 1 kg to 250 kg.
- Optical Magnifications – 35X, 70X & 140X available.
- A precision Diamond Indentor (136° pyramid) is used to make sharp indentations on the specimens / samples.
- Maximum Test height x Throat : 250 x 150 mm.
- Load accuracy well within ± 1% of nominal load value. Machine conforms to IS:1754.
- Computerized model is available .Computerized model has built in CCD and suitable advanced software.
- Hardness will be displayed on computer monitor automatically. Results printout can be taken.
Technical Specification
MODELS | BV-50 | BV-50-S | BV-120 | BV-120-S | BV-250 | BV-250-S |
Loads (kgf.) | 5, 10, 15, 20, 30, 40 & 50 (Loads for Vickers) |
1, 2, 5, 10, 20, 30, 40 & 50 (Loads for Vickers) |
5, 10, 15, 20, 30, 40, 50, 60, 100 & 120 (Loads for Vickers) |
1, 2, 5, 10, 15, 20, 30, 40, 50, 60, 100 & 120 (Loads for Vickers) |
5, 10, 15, 20, 30, 40, 50, 60, 100 & 120 (Loads for Vickers) |
1, 2, 5, 10, 15, 20, 30, 40, 50, 60, 100 & 120 (Loads for Vickers) |
15.625, 31.25 (Loads for Brinell)* |
15.625, 31.25 (Loads for Brinell)* |
15.625, 31.25 (Loads for Brinell)* |
15.625, 31.25 (Loads for Brinell)* |
15.625, 31.25, 62.5, 187.5 & 250 (Loads for Brinell)* |
15.625, 31.25, 62.5, 187.5 & 250 (Loads for Brinell)* |
|
Optical Magnification | 70X, 140X | 70X, 140X | 70X, 140X | 70X, 140X | 35X, 70X, 140X | 35X, 70X, 140X |
Maximum Test Height mm) | 250 | 250 | 250 | 250 | 250 | 250 |
Sweep of Machine Frame (mm) | 150 | 150 | 150 | 150 | 150 | 150 |
Weight Approx. (kgs) | 175 | 180 | 185 | 190 | 195 | 200 |
Dimension LxWxH (mm) (Approx.) | 660 x 320 x 990 | 660 x 320 x 1130 | 660 x 320 x 990 | 660 x 320 x1130 | 660 x 320 x 990 | 660 x 320 x 1130 |
Connected Load | 0.1 KVA, 1 Phase, AC, 220V, 50Hz | |||||
Machine is compatible with: 13277-1992 | ||||||
· Loads can be supplied in Newtons also. · Least count of optical system 0.0005mm | ||||||
These Brinell loads can be used by purchasing suitable ball indenters and test blocks | ||||||
Measuring Range, Possible w.r.t. Selected, Optical Magnification | 0-3.2 mm on 35X Magnification | |||||
0-1.6 mm on 70X Magnification | ||||||
0-0.8 mm on 140X magnification |
Standard Accessories
MODELS | BV-50 | BV-50-S | BV-120 |
BV-120-S |
BV-250 | BV-250-S |
Flat Table of 100 mm Dia. | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. |
Vee Table for Specimen – 6 to 80 mm Dia. | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. |
Vickers Diamond Indentor | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. |
2.5 mm Ball Indentor | – | – | – | – | 1 No. | 1 No. |
5 mm Boll Indentor | – | – | – | – | 1 No. | 1 No. |
Vickers Hardness Test Block | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. |
Brinell Hardness Test Block | – | – | – | – | 1 No. | 1 No. |
Electrical Card | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. | 1 No. |
Instruction Manual | 1 Book | 1 Book | 1 Book | 1 Book | 1 Book | 1 Book |
2.5 mm Steel Balls | – | – | – | – | 5 Nos. | 5 Nos. |
5 mm Steel Balls | – | – | – | – | 5 Nos. | 5 Nos. |
Machine is compatible with: 13277-1992 |
Related posts:Drop Weight Impact Testing Machines (Model - FDW-1650 J)Jomini Test Fixture (Model : MJOM-25)Dense Phase Pressure Conveying SystemCoil Spring Testing Machines, Digital, Hand Operated (Model : STM)Deep Throat Brinell Hardness Testing Machines with Roller ConveyorsHorizontal Type DSP Based Dynamic Balancing Machines (Model : FBM)Analogue Tensile Testing Machines (Model : TKG)
Drop Weight Impact Testing Machines (Model - FDW-1650 J)
Jomini Test Fixture (Model : MJOM-25)
Dense Phase Pressure Conveying System
Coil Spring Testing Machines, Digital, Hand Operated (Model : STM)
Deep Throat Brinell Hardness Testing Machines with Roller Conveyors
Horizontal Type DSP Based Dynamic Balancing Machines (Model : FBM)
Analogue Tensile Testing Machines (Model : TKG)